How to use it
- Choose your tuning (Honchōshi, Niagari or Sansagari) and your pitch number (honsuu).
- Tap "Turn microphone on" and allow microphone access.
- Pluck the first string, then turn its peg a little at a time until the needle sits in the center.
When it is in tune, move on to the second string, then the third. Finally, play all three in turn and listen to how they sound together.
How the strings relate in Honchōshi, Niagari and Sansagari
The three tunings differ in the intervals between the strings.
- Honchōshi: a fourth between the first and second strings, and a fifth between the second and third.
- Niagari: a fifth between the first and second strings, and a fourth between the second and third.
- Sansagari: a fourth between the first and second strings, and a fourth between the second and third.
Our tuning guide explains how each tuning sounds and when it is used.
What is the pitch number (honsuu)?
The pitch number (honsuu), shown as "Pitch" and "No.4" in the tuner, sets the pitch of the first string. It is chosen to suit the singer's voice, and a higher number means a higher first string. If you are not sure, follow what your teacher or textbook says.
When it does not respond
- Loud surroundings can make the needle unstable. Find a quiet place and pluck one string clearly at a time.
- Holding the microphone closer to the shamisen helps it pick up the sound.
- If the pitch appears an octave off, switch the tuner's "Range".
- If the needle will not settle, tap "Turn microphone off" and then turn it on again.
What you can do with Shami, your practice partner
Shami is an app for people who practice the shamisen. After tuning here, you can go straight on to practice.
- Practice with the score in front of you, changing the tempo to play it back slowly.
- Log the songs and time you practiced and look back later (the free plan shows the last 30 days).
- The app has a tuner too, so you can tune right before you play.